Garnish Molding Replacement - Front Door Front

Garnish Molding Replacement - Front Door Front

Removal Procedure





1. Grasp the front door front garnish molding.
Gently pull at the top of the molding in order to disengage the retaining clips.
2. Lift the front door front garnish molding up to disengage the tab on the garnish molding from the slot on the door trim panel.
3. Inspect the front door front garnish molding for broken or missing retaining clips. Replace any clips, if needed.



Installation Procedure





1. Install the front door front garnish molding to the vehicle.
2. Insert the tab on the bottom of the garnish molding into the slot at the top of the door trim panel.
3. Align the retainers on the front door front garnish molding with the slots in the door.
4. Push on the molding in order to engage the retainers.