Accident With/Without Air Bag Deployment

After a collision, the following components need to be inspected as indicated. If any damage is detected, replace the component. If damage to the mounting points or mounting hardware is detected, repair or replace the mounting points and mounting hardware as needed.
^ Steering column - Perform the steering column accident damage checking procedures. Refer to Steering Column Accident Damage Inspection - Off Vehicle in Steering Wheel and Column.
^ I/P knee Bolsters and Mounting Points - Inspect the knee bolsters for bending, twisting, buckling, or any other type of damage.
^ I/P brackets, braces, etc. - Inspect for bending, twisting, buckling, or any other type of damage.
^ Seat Belts - Perform the seat belt operational and functional checks. Refer to Operational and Functional Checks in Seat Belts.
^ Seats and Seat Mounting Points - Inspect for bending, twisting, buckling, or any other type of damage.

After inspecting the components listed above, proceed to the following Component Replacement and Inspections if air bag deployment has occurred.