Trim Covers, Shift Lever Seal - Disassemble

Trim Covers, Shift Lever Seal - Disassemble - Off Vehicle

- Tools Required
- J 41352 Modular Column Holding Fixture





1. Put the steering column and J 41352 into a vise.
2. Inspect the steering column for accident damage.





3. Remove the 2 pan head tapping screws (1) from the lower trim cover (2).





4. Remove the lower trim cover from the upper trim cover.
5. Tilt the lower trim cover down.
6. Slide the lower trim cover backward in order to disengage the locking tabs.





7. Remove the trim cover protector (1) from the lower trim cover (2).





8. Remove the 2 TORX(R) head screws (1) from the upper trim cover (2).
9. Remove the upper trim cover (2) from the steering column.