Spare Tire: Service and Repair

Tire Hoist and Shaft Replacement

Removal Procedure





1. Remove the spare tire from the tire hoist.
2. Remove the retaining bolt from the hoist.





3. Remove the pin and the retainer clip from the hoist and the shaft.





4. Remove the spare tire shaft and guide from the vehicle.





5. Remove the hoist from the crossmember.

Installation Procedure





1. Install the hoist to the crossmember.





2. Install the spare tire shaft and guide to the vehicle.





3. Install the pin and the retainer clip to the hoist and the shaft.

Notice: Refer to Fastener Notice in Service Precautions.





4. Install the retaining bolt to the hoist.
Tighten the bolt to 20 Nm (15 ft. lbs.).
5. Install the spare tire to the hoist.