Recirculation Actuator Replacement

REMOVAL PROCEDURE




1. Remove the engine cover.
2. Remove the passenger side knee bolster.
3. Disconnect the recirculation vacuum harness from the recirculation actuator (1).
4. Remove the recirculation actuator (1) from the heater case.
5. Remove the recirculation actuator linkage.

INSTALLATION PROCEDURE




1. Install the recirculation actuator linkage.
Install the recirculation actuator (1) to the heater case.
2. Connect the recirculation vacuum harness to the recirculation actuator (1).
3. Install the passenger side knee bolster.
4. Install the engine cover.