Forward Servo Replacement
Forward Servo ReplacementRemoval Procedure
1. Lift the vehicle. Refer to Vehicle Lifting.
2. Remove the oil pan and filter.
3. Remove the six forward servo cover bolts, cover, and gasket.
4. Remove the following parts:
^ Forward servo piston pin (5)
^ O-ring seal (4)
^ Servo piston (3)
^ Retainer (2)
^ Piston spring (1
Installation Procedure
1. Install the following parts:
^ Piston spring (1)
^ Retainer (2)
^ Servo piston (3)
^ O-ring seal (4)
^ Forward servo piston pin (5)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the six forward servo gasket, cover, and six bolts.
^ Tighten the bolts to 24 Nm (18 ft. lbs.).
3. Install the oil pan and filter.
4. Lower the vehicle.