Cylinder Bore Specifications
| Cylinder Bore-Standard-Red Marking | 3.3075 - 3.3078 |
| Cylinder Bore-Standard-Blue Marking | 3.3071 - 3.3074 |
| Cylinder Bore-Maximum | 3.3090 |
| Cylinder Bore-Allowance for Honing | 0.008 |
| Taper and Out-of-Round-Maximum | 0.0039 |
| Cylinder Bore Diameter-Maximum | 3.3090 |
| Cylinder Bore Taper-Maximum | 0.004 |
| Cylinder Bore Out-of-Round-Maximum | 0.004 |