Front Door Hinge: Service and Repair

Front Side Door Hinge Replacement

Removal Procedure





1. Remove the front fender. Refer to Front Fender Replacement (Service and Repair) in Body Front End.
2. Mark the position of the front side door hinge (1) to the front side door and the door jamb.
3. Remove the 2 bolts (3) that retain the hinge (1) to the door.
4. Remove the 2 bolts (2) that retain the hinge (1) to the door jamb.
5. Remove the hinge (1) from the vehicle.



Installation Procedure





1. Install the front side door hinge (1) to the vehicle by aligning the hinge with the marks made during the removal procedure. Secure the hinge to the door jamb with the 2 bolts (2). Do not tighten completely at this time.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the 2 bolts (3) that retain the hinge (1) to the door.

Tighten the front side door hinge bolts to 27 N.m (19 lb ft).

3. Install the front fender. Refer to Front Fender Replacement (Service and Repair) in Body Front End.