Hose Replacement - Rear (Liftgate)

REMOVAL PROCEDURE
1. Remove the Liftgate trim panel.
2. Disconnect the hose from the Liftgate harness.
3. Disconnect the hose from the Liftgate inner panel.
4. Remove the 2 clips that secure the hose to the Liftgate.

INSTALLATION PROCEDURE
1. Apply lubricant to both ends of the hose.
2. Install the hose to the Liftgate inner panel using 2 hose clips.
3. Connect the hose to the Liftgate harness.
4. Connect the hose to the Liftgate inner panel.
5. Install the Liftgate trim panel.