Hose Replacement - Rear (Body)

REMOVAL PROCEDURE
1. Remove the upper rear garnish molding.
2. Remove the body side trim panel.
3. Remove the Liftgate door silt plate.
4. Disconnect the hose from the body harness connection.
5. Disconnect the hose from the Liftgate harness connection.
6. Remove the hose clips from the vehicle body.
7. Remove the hose assembly.

INSTALLATION PROCEDURE
1. Install the hose clips into the body.
2. Apply lubricant to both of the hose connections.
3. Install the hose to the Liftgate harness.
4. Install the hose to the body harness.
5. Install the body side trim panel.
6. Install the Liftgate door sill plate.
7. Install the upper rear garnish molding.