Floor Shift Control Replacement

Removal Procedure
1. Remove the shift lever. Refer to Floor Shift Control Boot Replacement.





2. Remove the shift control cover.
3. Remove the shift cable. Refer to Shift Cable Replacement.





4. Remove the nuts securing the shift controller to the floor panel.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.

1. Install the nuts securing the shift controller to the floor panel.
^ Tighten the nuts to 25 Nm (18 inch lbs.).





2. Install the shift cable. Refer to Shift Cable Replacement.





3. Install the shift control cover.
4. Install shift boot. Refer to Floor Shift Control Boot Replacement.