Automatic Level Control Sensor Link Replacement

Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the automatic level control sensor link from the rear differential bracket ball stud.
3. Remove the automatic level control sensor link from the automatic level control sensor arm ball stud.

Installation Procedure

Notice: When you are servicing the automatic level control sensor link, ensure that the sensor link and the sensor arm are not damaged. Ensure the sensor arm and the sensor link are properly oriented. Improper orientation of the sensor arm and the sensor link may cause damage to the automatic level control system or the vehicle.





1. Install the automatic level control sensor link to the automatic level control sensor arm ball stud.
2. Install the automatic level control sensor link to the rear differential bracket ball stud.
3. Lower the vehicle.