Glove Box Lamp Switch: Service and Repair

REMOVAL PROCEDURE
1. Remove instrument panel door.
2. Remove the instrument panel compartment lamp switch from the instrument panel compartment by releasing the retaining tabs.
3. Disconnect the electrical connector from the instrument panel compartment lamp switch.
4. Pull the bulb from the instrument panel compartment lamp switch socket.

INSTALLATION PROCEDURE
1. Press bulb into the instrument panel compartment lamp switch socket.
2. Connect the electrical connector to the instrument panel compartment lamp switch.
3. Install the instrument panel compartment lamp switch.
Press in until retainers are fully seated.
4. Install the instrument panel door.