Dome Lamp Bulb Replacement (Without Sunroof)

REMOVAL PROCEDURE
On utility vehicles, two different lamps are used. One type of dome lamp is incorporated to the overhead console. On utility vehicles without an overhead console, a separate unit is used.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the battery negative cable.
2. Use a flat-bladed tool in order to remove the dome lamp lens from the overhead console.




3. Remove the bulb from the overhead console.

INSTALLATION PROCEDURE




1. Install the bulb to the overhead console.
2. Install the dome lamp lens to the overhead console by snapping the lens into position.
3. Connect the battery negative cable.