Glove Box Lamp: Service and Repair

REMOVAL PROCEDURE
1. Remove the instrument panel storage compartment bezel.
2. Disconnect the electrical connector from the lamp and switch assembly.
3. Remove the lamp and switch assembly retaining screw from the instrument panel storage compartment bezel.
4. Push the lamp and switch assembly out
5. Remove the bulb from the lamp and switch assembly.

INSTALLATION PROCEDURE
1. Install the bulb to the lamp and switch assembly.
2. Install the lamp and switch assembly screw to the instrument panel storage compartment bezel.
3. Connect the electrical connector to the lamp and switch assembly.
4. Install the instrument panel storage compartment bezel.