Compressor Pressure Relief Valve Install
TOOLS REQUIREDJ 41790 Compressor Holding Fixture
1. Clean the pressure relief valve seat area of the rear head.
2. Lubricate the O-ring of the new pressure relief valve with clean 525 viscosity refrigerant oil.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the new pressure relief valve into the compressor.
Tighten
Tighten the compressor pressure relief valve to 9 N.m (80 lb in).
4. Remove the compressor from the J 41790.
5. Install the A/C compressor to the vehicle.