Drive Belt Tensioner: Service and Repair

Removal Procedure





Notice: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.

1. From under the vehicle, remove the drive belt. Refer to Drive Belt Replacement.
2. Remove the drive belt tensioner assembly bolt.
3. Remove the drive belt tensioner assembly.

Installation Procedure





Notice: Refer to Fastener Notice in Service Precautions.

1. From under the vehicle, install the drive belt tensioner assembly and bolt to the engine. Ensure that the pin on the tensioner fits into the locating hole on the engine front cover.

^ Tighten the drive belt tensioner bolt to 50 Nm (37 ft. lbs.).

2. Install the drive belt. Refer to Drive Belt Replacement.