Fan Clutch: Service and Repair

Removal Procedure

^ Tools Required
- J 41240 Fan Clutch Wrench





1. Remove the upper fan shroud. Refer to Fan Shroud Replacement.

Important: In order to maintain a balanced fan assembly, align the yellow paint mark on the fan clutch hub with the yellow paint mark on the water pump hub.

2. Remove the fan clutch from the coolant pump using J 41240
2.1. Install J 41240-1 into the water pump access holes.
2.2. With J 41240-2 secure on the fan clutch nut, hold J 41240-1 firmly in place while turning J 41240-2 counter-clockwise.
3. Remove the fan and the fan clutch as an assembly.





4. Remove the fan-to-fan clutch mounting bolts.
5. Remove the fan from the clutch.

Installation Procedure





Notice: Refer to Fastener Notice in Service Precautions.

1. Install the fan to the fan clutch mounting bolts.

^ Tighten the fan clutch mounting bolts to 33 Nm (24 ft. lbs.).





2. Install the fan and fan clutch assembly to the coolant pump pulley using the J 41240.
3. Install the upper fan shroud. Refer to Fan Shroud Replacement.