EBCM 325

Circuit Description
The Instrument Panel Cluster (IPC) commands the ABS Indicator on at bulb check until the IPC receives a class 2 serial data message from the EBCM commanding the ABS indicator off. If the EBCM sets a DTC(s), the EBCM may send a class 2 serial data message to the IPC commanding the ABS indicator on.

Diagnostic Aids
The malfunction must be present during diagnosis in order to prevent unnecessary parts replacement. Always begin diagnosis with a Diagnostic System Check.

Test Description





3. This step tests if the IPC is able to turn off the ABS indicator.