PWR

1. Press the PWR knob in order to turn the system on.
The system can also be turned on by inserting a compact disc into the player with the ignition in the ON position.
2. Insert a disc partway into the slot, label side up.
2.1. The player pulls the disc in.
2.2. When inserted, the disc will begin playing track 1.
2.3. Wait a few seconds until the disc plays.
2.4. The letters CD and a CD symbol appears on the display.
3. If the disc comes back out and ERR appears on the display, inspect for the following conditions:
^ The disc is upside down.
^ The disc is dirty, scratched, or wet.
^ There is too much moisture in the air.
Wait an hour and try again.
^ The vehicle is operating on a very rough road.
^ The disc player is very hot.
4. Press RECALL in order to eliminate the ERR message.