FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Torque Converter Clutch Solenoid: Service and Repair

Removal Procedure





1. Raise the vehicle.
2. Remove the oil pan and the filter. Refer to Automatic Transmission Fluid/Filter Changing.
3. Disconnect the wiring harness if necessary.
4. Remove the snap ring.
5. Remove the plug.
6. Remove the valve.
7. Remove the spring.

Installation Procedure





1. Install the spring.
2. Install the valve.
3. Install the plug.
4. Install the snap ring.
5. Connect the wiring harness if necessary.
6. Install the filter, the oil pan and the fluid. Refer to Automatic Transmission Fluid/Filter Changing.
7. Lower the vehicle.