Suspension Control ( Automatic - Electronic ): Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution.





1. Disconnect the battery negative cable.
2. Remove the body side trim panel. Refer to Trim Panel Replacement - Body Side (4-Door Utility) in Interior Trim.
3. Remove the load leveling timer relay retainers.
4. Disconnect the electrical connector from the load leveling timer relay.

INSTALLATION PROCEDURE





1. Connect the electrical connector to the load leveling timer relay.
2. Install the load leveling timer relay retainers.
3. Install the body side trim panel. Refer to Trim Panel Replacement - Body Side (4-Door Utility) in Interior Trim.
4. Connect the battery negative cable.