Knee Bolster Replacement

Knee Bolster Replacement

Removal Procedure




1. Turn the ignition switch to the LOCK position.
2. Remove the left sound insulator.
3. Remove the knee bolster trim panel.
4. Remove the instrument panel accessory trim plate.
5. Remove the nuts that retain the knee bolster from the steering column support.
6. Remove the knee bolster from the studs.

Installation Procedure




1. Install the knee bolster to the studs.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the nuts that retain the knee bolster to the steering column support.

Tighten the nuts to 10 N.m (89 lb in).

3. Install the instrument panel accessory trim plate.
4. Install the knee bolster trim panel.
5. Install the left sound insulator.