With Sunroof

REMOVAL PROCEDURE
1. Remove the screw at the front of the console that retains the sunroof console to the roof.
2. Pull downward on the rear of the console in order to remove the sunroof console from the roof.
3. Disconnect the electrical connectors as needed (1,5, and 6).
4. Remove the screw that retains the sunroof console mounting bracket to the roof.

INSTALLATION PROCEDURE
1. Install the electrical connectors as needed (1, 5, and 6).
2. Insert the console mounting tabs into the mounting bracket and push upward on the rear of the console in order to install the console.

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the screw at the front of the console that retains the console to the roof.

Tighten
Tighten the screw to 1.9 N.m (17 lb in).