Park Brake Cable Replacement - Rear (4WD Pickups and Utilities)

Removal Procedure





1. Release the park brake.
2. Raise the vehicle and support the vehicle with safety stands.
3. Loosen the front cable at the equalizer.





4. Disconnect the front cable connector from the rear park brake cable.





5. Disconnect the cable from the park brake lever at the rear axle.
6. Unclip the park brake cables from the rear axle differential retainer.





7. Route the cables through the cable bracket.
8. Remove the rear park brake cable assembly.

Installation Procedure





1. Route the cables through the cable bracket.
2. Connect the rear park brake cable to the lever.





3. Install the cable to the park brake lever at the rear axle.
4. Clip the park brake cables to the rear axle differential retainer.





5. Install the front cable at the equalizer.
6. Adjust the park brake shoes.
7. Adjust the park brake cable.