Endgate Cable Replacement (Utility)

Endgate Cable Replacement (Utility)

Removal Procedure




1. Safely support the endgate in the open position.
2. Remove the bolts that retain the endgate supports to the endgate.
3. Remove the endgate supports from the vehicle.

Installation Procedure




1. Install the endgate supports to the vehicle.
2. Install the bolts that retain the endgate supports to the endgate.

Notice: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 3 N.m (25 lb in)

3. Close the endgate.