Rear Upper Garnish Molding Replacement

Rear Upper Garnish Molding Replacement

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure




1. Use the J 38778 in order to remove the rear header garnish molding.
Insert the J 38778 and work along the front edge of the trim panel from one end to the other.
2. Remove the cargo lamp from the roof rear header garnish molding.

Installation Procedure




1. Install the cargo lamp from the roof to the rear header garnish molding.
2. Install the roof rear header garnish molding to the vehicle.