Rear Floor Panel Carpet Replacement

Rear Floor Panel Carpet Replacement

Removal Procedure

1. Remove the rear seat floor filler trim panels.
2. Remove the body side trim panels, as necessary.
3. Remove the jack from the vehicle.
4. Remove the endgate or the liftgate door sill trim plate.




5. Remove the bolts that retain the cargo tie down hooks to the floor.
6. Remove the cargo tie down hooks.




7. Remove the rear carpet or the mat from the vehicle.

Installation Procedure






Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.

1. Install the rear carpet or the mat to the vehicle.




2. Install the cargo tie down hooks.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bolts that retain the cargo tie down hooks to the floor.

Tighten the bolts to 35 N.m (26 lb ft).

4. Install the endgate or the liftgate door sill trim plate.
5. Install the jack to the vehicle.
6. Install the body side trim panels, as necessary.
7. Install the rear seat floor filler trim panels.