Amplifier: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.




1. Remove the negative battery cable.
2. Remove the floor console from the vehicle.
3. Remove the console wiring harness from the amplifier.




4. Remove the amplifier retaining bolts.




5. Remove the amplifier from the console through the bottom of the console.

INSTALLATION PROCEDURE



1. Install the amplifier to the console.

NOTE: Refer to Fastener Notice in Cautions and Notices.




2. Install the amplifier retaining bolts.

Tighten
Tighten the amplifier to console screws to 6 N.m (53 lb in).




3. Install the console wiring harness to the amplifier.
4. Install the floor console to the vehicle.
5. Install the negative battery cable.