Air Cleaner Housing: Service and Repair

REMOVAL PROCEDURE
1. Loosen the air cleaner duct clamp at MAF sensor.
2. Remove the air cleaner assembly bolts.
3. Remove the air cleaner assembly.

INSTALLATION PROCEDURE
1. Install air cleaner assembly

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the air cleaner assembly bolts.

Tighten
Tighten the bolt to 18 N.m (13 lb ft).

NOTE: Handle the MAF sensor carefully. Do not drop the MAF sensor. Do not damage the screen located at the air inlet end of the MAF. Do not touch the sensing elements. Do not allow solvents and lubricants to come in contact with the sensing elements. Use a small amount of SPO P/N 12345884 lubricant or the soap based equivalent in order to aid in the installation.

3. Install air cleaner duct to MAF sensor.