Left

Removal Procedure
1. Remove the body side upper garnish molding.
2. Remove the body side lower garnish molding.
3. Remove the body side trim panel.
4. Remove the upper seat belt guide retaining bolt from the seat belt guide.
5. Remove the upper seat belt guide from the vehicle.
6. Remove the seat belt retractor retaining bolt from the vehicle.
7. Remove the seat belt retractor from the vehicle.

Installation Procedure
1. Install the seat belt retractor to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the seat belt retractor retaining bolt to the vehicle.

Tighten
Tighten the seat belt retractor retaining bolt to 52 N.m (38 lb ft).

3. Install the seat belt guide to the vehicle.
4. Install the seat belt guide retaining bolt to the vehicle.

Tighten
Tighten the seat belt guide retaining bolt to 52 N.m (38 lb ft).

5. Install the body side trim panel.
6. Install the body side lower garnish molding.
7. Install the body side upper garnish molding.