Brake Rotor Replacement
REMOVAL PROCEDURE1. Raise the vehicle. Support the vehicle with safety stands.
2. Remove the tire and wheel assembly.
3. Remove the brake caliper.
4. Remove the wheel bearings.
5. Remove the rotor.
6. Inspect and clean all of the parts. Replace the parts as necessary.
7. Refinish the rotor if required.
INSTALLATION PROCEDURE
1. Install the rotor.
2. Install the wheel bearings.
3. Install the brake caliper.
4. Install the tire and wheel assembly.
5. Remove the safety stands.
6. Lower the vehicle.
7. Depress the brake pedal.
8. Burnish the front brake rotors and pads.