PWR

^ Press the PWR knob in order to turn the system on.
^ The system can be turned on by inserting a compact disc into the player with the ignition in the ON position.
^ Insert a disc partway into the slot, label side up.
^ The player pulls the disc in.
^ When inserted, the disc will begin playing track 1.
^ Wait a few seconds until the disc plays.
^ The letters "CD" and a CD symbol appears on the display.
^ If the disc comes back out and ERR appears on the display, inspect for the following conditions:
^ The disc is upside down.
^ The disc is dirty, scratched, or wet.
^ There is too much moisture in the air. Wait an hour and try again.
^ The vehicle is operating on a very rough road.
^ The disc player is very hot.
^ Press RECALL in order to eliminate the ERR message.