Cleaning Gasoline From the Fuel System

PROCEDURE
1. Drain the fuel tank.
2. Fill the fuel tank.
3. Remove the FUEL SOL fuse from the fuse panel.
4. Remove the fuel filter outlet and connect it to a hose that flows to a metal container.
5. Use a scan tool and command the lift pump ON until clean fuel flows from the fuel filter outlet into a metal container.
6. Connect the hose from the fuel filter outlet to the injection pump inlet.
7. Install the FUEL SOL fuse into the fuse panel.
8. Attempt to start and run the engine for 15 minutes (If engine does not start, purge the injection system).
9. Stop the engine.
10. Clean any fuel spillage from the engine.
11. Clear the engine of any DTCs.