Connecting the Negative Battery Cable For Service

1. Verify that all electrical components are off such as interior lights, all doors are closed, underhood lamp etc.
2. Clean the negative battery cable from corrosion using a metal brush.
3. Install the auxiliary battery negative cable to the battery.

NOTICE: Refer to Fastener Notice in Cautions and Notices.

Tighten
Tighten the auxiliary battery negative cable to 17 N.m (13 lb ft).

4. Install the battery negative cable to the battery.
5. Install the retaining bolt to the battery negative cable.

Tighten
Tighten the battery negative cable bolt to 17 N.m (13 lb ft).

6. Reset the radio stations and clock.