Front

REMOVE OR DISCONNECT
1. Battery ground cable.
2. Blower motor lead and ground wires (134).
3. Blower motor cooling tube (133).
4. Case attaching screws.
5. Blower assembly.
^ Carefully pry the blower flange away from the case it the sealer acts as an adhesive.
6. Shaft nut.
7. Blower wheel from motor shaft.
^ Remove shaft nut.

INSTALL OR CONNECT
1. Blower wheel to the motor shaft.
2. Shaft nut
3. Blower assembly.
^ Use a new bead of permagum sealer on the flange.
4. Blower motor cooling tube (133).
5. Blower motor lead and ground wires (134).
6. Battery ground cable.