Manual Shift Linkage Adjust - Console Shift

1. Shift tube and selector lever must be loose in mast jacket, see images.

2. Remove screw and spring washer from swivel assembly.

3. Place transmission lever in Neutral by rotating lever counterclockwise to the L1 detent, then three detents clockwise to the Neutral position.

4. Place selector lever in Neutral as obtained by a mechanical stop in steering column. Assemble swivel to lever assembly and tighten screw.

5. Check operation and readjust indicator needle as necessary. With ignition key in the lock position and Selector lever in Park, the key can be removed and the steering wheel must be locked.