Cylinder Head Assembly: Specifications

Tighten the cylinder head bolts to 25 Nm (18 lb ft)
Tighten the cylinder head bolts an additional 180°

Cylinder Head - Surface Flatness (max) Block Deck - longitude 0.05 mm
Cylinder Head - Surface Flatness (max) Block Deck - transverse 0.03 0.00118 mm


Refer to Camshaft. Specifications

Refer to Intake Manifoldt. Specifications

Refer to Exhaust Manifold. Specifications

Refer to Camshaft Gear/Sprocket. Specifications