Front Bumper Upper Fascia Replacement

Front Bumper Upper Fascia Replacement











2.Remove the front bumper lower fascia center grille. Refer to Front Bumper Lower Fascia Center Grille Replacement .

1Front Bumper Upper Fascia Screw (Qty: 2)
Caution:Refer to Fastener Caution .

Procedure

1.Carefully push a small nylon wedge between the lower fascia and the upper fascia. Insert a small flat-bladed tool into the fascia slot and depress the tabs one at a time and pull on the upper fascia at the same time to gradually remove the upper fascia from the lower fascia.

2.Transfer parts as needed.
Tighten 2.5 N �m (22 lb in)

2Front Bumper Upper Fascia