Hybrid/EV Battery Pack Capacity Learn

Hybrid/EV Battery Pack Capacity Learn

Hybrid/EV Battery Pack Capacity Learn

The Hybrid/EV Battery Pack Capacity Learn procedure must be completed when the following components are replaced:

* Hybrid/EV Powertrain Control Module 2
* Hybrid/EV Battery Energy Control Module
* Hybrid/EV Battery Interface Control Module
* Hybrid/EV Battery Pack

The Hybrid/EV Powertrain Control Module 2 Capacity Learn procedure can be completed with a scan tool using the following steps:

1. Install the scan tool to the data link connector.
2. Vehicle in Service Mode, engine OFF.
3. Select Hybrid/EV Battery Pack Capacity Reset in the Hybrid/EV Powertrain Control Module 2 Control Functions list
4. Follow the scan tool directions to complete the procedure.
5. Select Hybrid/EV Battery Pack Capacity Learn in the Hybrid/EV Powertrain Control Module 2 Control Functions list
6. Follow the scan tool directions to complete the procedure.
7. Clear any DTCs that may be set.