77. Automatic Transmission Flex Plate Removal

Automatic Transmission Flex Plate Removal

Special Tools
* EN-49979 - Crankshaft Shock Mount Retainer.
* EN-956-1 - Extension.

For equivalent regional tools, refer to Special Tools Tools and Equipment.

1. Install EN-49979 - retainer to EN-956-1 - extension.




2. Install EN-49979 - retainer (1) in compound with EN-956-1 - extension (2) to the crankshaft balancer as shown.




3. Loosen the 6 flex plate bolts (3) while holding up the crankshaft balancer.
4. Remove the 6 flex plate bolts and the flex plate bolt washer (2).
5. Remove the flex plate (1).