Right Hand Axle Seal Assemble

Right Hand Axle Seal Assemble


Tools Required
* J 8092 Driver Handle
* J 41102-1A Axle Seal Installer







Important: You must use the J 41102-1A in order to install the seal correctly. The J 41102-1A installs the axle seal to a given depth.


1. Install a new right hand axle seal (2) into the transmission case. Use the J 41102-1A with the J 8092 .
2. In order to prevent damage to the shaft splines during vehicle operation, add Polyurea grease (part number 7843867) to the splines on the output shaft.