Service Limits & General Specifications

Crankshaft

End Play 0.070 - 0.302 mm (0.0027 - 0.0118 in)
Main Bearing Clearance - All 0.015 - 0.040 mm (0.00059 - 0.00157 in)
Main Journal Diameter - All 57.978 - 57.995 mm (2.2788 - 2.2832 in)
Radial Runout - Shaft Support on No. 1 and No. 5 Bearings Measured at No. 3 Journal 0.03 mm (0.00118 in)
Service Oversize, Available in 2 sizes 0.25 and 0.5 mm (0.00098 and 0.019 in)