Fuel Injector: Service and Repair

Fuel Injector Replacement

Removal Procedure




1. Remove the fuel rail. Refer to Fuel Rail Assembly Replacement Service and Repair.
Remove the fuel injector retainer clips.
2. Remove the fuel injectors by pulling them down and out.
3. Discard the fuel injector O-rings.

Installation Procedure





Important: Different injectors are calibrated for different flow rates. When ordering new fuel injectors, be certain to order the identical part number that is inscribed on the old injector.


1. Lubricate the new fuel injector O-rings with engine oil. Install the new O-rings on the fuel injectors.
2. Install the fuel injectors into the fuel rail sockets with the fuel injector terminals facing outward.
3. Install the fuel injector retaining clips onto the fuel injector and the fuel rail ledge.
4. Make sure that the clips are parallel to the fuel injector harness connector.
5. Install the fuel rail assembly. Refer to Fuel Rail Assembly Replacement Service and Repair.