Air Cleaner Housing: Service and Repair

Air Cleaner Assembly Replacement

Removal





Caution: Refer to Battery Disconnect Caution Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Disconnect the intake air temperature (IAT) sensor.
3. Remove the air cleaner outlet hose from the throttle body.
4. Remove the breather tube from the camshaft cover.




5. Remove the air cleaner housing bolts.
6. Remove the air cleaner housing.

Installation




1. Install the air cleaner housing.

Notice: Refer to Fastener Notice Fastener Notice.

2. Install the air cleaner housing bolts.

Tighten the air cleaner housing bolts to 10 Nm (89 lb in).




3. Connect the air intake tube to the throttle body.
4. Connect the breather tube to the valve cover.
5. Connect the IAT sensor.
6. Connect the negative battery cable.