B1652

DTC B1652

Circuit Description

When the ignition switch is turned to ON, the sensing and diagnostic module (SDM) will perform a turn-on test to diagnose critical malfunctions within the SDM itself.

In case of the passenger side air bag inflation by side impact, the SDM maintains the warning lamp ON and then all the air bag systems should be inspected including pretensioners and also the side impact sensor, wiring should be replaced. If the passenger side air bag inflation by side impact counts over 5, the SDM should also be replaced.

DTC Descriptor

This diagnostic procedure supports the following DTC:

DTC B1652 RH Side Air Bag Deployment Commanded

Conditions for Running the DTC

Ignition voltage is within the normal operating voltage range.

Conditions for Setting the DTC

The history of the passenger side air bag inflation or belt pretensioner explosion is in the SDM.

Action Taken When the DTC Sets

The SDM commands the AIR BAG indicator ON.

Conditions for Clearing the DTC

The condition responsible for setting the DTC no longer exists and the scan tool Clear DTCs function is used.