Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine

Evaporative Emission Hoses/Pipes Replacement - Engine

Removal Procedure




1. Remove the intake manifold cover.
2. Remove the air cleaner outlet duct.
3. Disconnect the evaporative emission (EVAP) canister purge tube from the purge valve.
4. Disconnect the EVAP purge tube from the intake manifold.
5. Remove the EVAP canister valve purge tube.

Installation Procedure




1. Remove the EVAP canister valve purge tube.
2. Connect the EVAP purge tube to the intake manifold.
3. Connect the EVAP canister purge tube to the purge valve.
4. Install the air cleaner outlet duct.
5. Install the intake manifold.