62. Oil Pan Installation

Oil Pan Installation





1. Make sure that the oil pan and mounting surface on the lower crankcase are free of all oil and debris.
2. Apply a 3.5 mm bead of GM P/N 12378521 (Canadian P/N 88901148) or equivalent around the perimeter of the oil pan and the oil suction port opening.





3. Install the oil pan.





4. Notice: Refer to Fastener Notice in Service Precautions.

Install the oil pan bolts.
^ Tighten the oil pan bolts to 25 Nm (18 ft. lbs.) in sequence.