Suspension Travel Bumper: Service and Repair

Spring Bumper Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting





2. Lower the rear axle in order to gain access to the top portion of the rear springs.





3. Remove the upper spring seat/jounce bumper from the spring, while leaving the lower spring seat on the axle.

Installation Procedure





Important: The rear springs are indexed with the colored tag toward the rear of the vehicle. No up/down or side to side orientation is required.

1. Install the upper spring seat/jounce bumper on the spring.





2. Raise the rear axle in order to seat rear spring.
3. Lower the vehicle.