Water Pump

Water Pump Access Cover Bolt 7 Nm (62 inch lbs.)
Water Pump/Balance Shaft Chain Tensioner Bolt 10 Nm (89 inch lbs.)
Water Pump Drain Plug 20 Nm (15 ft. lbs.)
Water Pump Sprocket Bolt 10 Nm (89 inch lbs.)

Water Pump Bolts
Install the inner water pump sprocket bolts. After 2 are snug, remove the guide pin and install the 3rd bolt.
Tighten the water pump bolts to 25 Nm (18 ft. lbs.)
Tighten the water pump sprocket bolts last.
Tighten the water pump sprocket bolts to 10 Nm (89 inch lbs.)





Charge air cooler pump.
Install the mounting clamp bolts to the charge air cooler pump.
Tighten the bolts to 10 Nm (88 inch lbs.)